CRT-511 PRO (incl. 8 TPMS sensors)

The CRT-511 Pro is a professional TPMS diagnostic tool that integrates TPMS sensor activation, reading, learning, and programming. It can activate and read tire pressure sensor information via radio frequency. It uses the OBD interface to reset TPMS modules and program the sensor by receiving a 433MHz frequency signal.

RF sensor

The LAUNCH RF sensor is a universal TPMS sensor for the aftermarket. As a high-frequency sensor, it can be programmed with the Creader 511 PRO TPMS diagnostic tool and used as a replacement for the vehicle's 95% original equipment (OE) sensor. With a 5-year battery life and over-the-air programming, these rubber RF sensors with plastic or metal horns offer a convenient, economical, and high-performance solution for TPMS service workshops. 

Fully functional TPMS diagnostic tool

The LAUNCH Creader 511 PRO TPMS Reset Tool integrates sensor activation, information reading, relearning, programming, and diagnostics into a single TPMS diagnostic tool. This professional tire pressure monitoring system learn tool can be used to activate all common and OE 433MHz sensors, display tire pressure information, and reset TPMS modules via OBD.

TPMS sensor programming

The new TPMS tool offers four programming options, including automatic creation, manual entry, ID copy via activation, and ID copy via OBDII. The Creader 511 PRO TPMS diagnostic tool can program eight sensors simultaneously. Note*: Only program LAUNCH TPMS sensors. 

TPMS learning tool

The LAUNCH Creader 511 PRO features a TPMS relearning function. Relearning is used to write the newly programmed sensor IDs to the vehicle's ECU for sensor recognition. The LAUNCH TPMS tool offers three modes for adapting the sensors: 1) Stationary Relearning, 2) OBDII Relearning, and 3) Automatic Relearning. The TPMS diagnostic scanner's built-in user manual guides you through the relearning process.

TPMS diagnostics & OBDII scanner

As a new combination of TPMS diagnostic tool and OBD code reader, the TPMS reset tool can perform comprehensive TPMS diagnostics via an OBD2 connection to read/clear fault codes and obtain tire data such as tire pressure and temperature, sensor battery, etc., ensuring you always know the tire status and promoting safe driving. The TPMS tool also includes 10 OBD modes (code read and clear, live data stream, freeze frame, etc.) to easily determine the cause of the check engine light.

Highlights of the LAUNCH Europe TPMS diagnostic tool

• The LAUNCH scanner offers comprehensive TPMS diagnostics, including reading codes, clearing codes, and receiving ECU information to pinpoint vehicle problems.
• This TPMS programmer can read tire pressure data such as tire pressure, tire temperature, battery status, etc.
• Multiple modes for programming the sensor: Automatic creation, manual input, ID copy via activation, and ID copy via OBDII.
• Various options for matching the sensor ID: stationary relearning, OBDII relearning, automatic relearning.
• The TPMS beginner tool supports unlimited programming for LAUNCH sensors, comparable to the OE diagnostic tool.
• The TPMS reset tool allows you to activate all OE and common 433 MHz sensors.
• LAUNCH TPMS scan tool covers 98% of vehicles with TPMS modules.
• The sensors can be programmed simultaneously, efficiently and user-friendly.
• The built-in rechargeable lithium battery ensures sustainable performance and long operating time.

4 ways to program the LAUNCH sensors

The programming function allows the user to program sensor data onto the new LAUNCH sensors and replace faulty sensors with low battery life or a non-functioning sensor. The LAUNCH Creader 511 PRO diagnostic tool can program 8 sensors simultaneously. Note*: This TPMS reset tool only programs LAUNCH sensors.

Copy ID by activation:

Copying the ID by activation: If the old sensors are not completely defective, you can use the TPMS relearning tool to trigger them accordingly and write the retrieved original sensor data to the LAUNCH sensor.

Manual entry:

If the original sensor is complete or cannot be activated, you can remove the original ID from the cover of the old sensors, manually enter the sensor ID, and write it to the new LAUNCH sensors.

Create automatically:

If the old sensor is completely worn out or the original sensor ID cannot be obtained, you can use the car TPMS monitoring tool to generate random IDs based on the test vehicle information.

3 modes for teaching the sensors

The relearning process is only used in certain cases, specifically when the newly programmed sensor IDs differ from the original sensor IDs stored in the vehicle's control unit. The LAUNCH Creader 511 PRO car scanner compares OE and common sensors with integrated TPMS modules and establishes communication between them.

Stationary relearning : The vehicle must be put into "learning mode", the instructions on the screen must be followed to activate the sensors and perform stationary relearning.

OBDII Relearn: Enables the Creader 511 PRO to write TPMS sensor IDs directly to the TPMS module via the OBD port.

Automatic relearning: You can complete the relearning process by driving and refer to the on-screen relearning procedure for the exact details of the process.

Full OBD functions

Read Code: Displays the detailed description of the DTCs (current, pending, and permanent codes).

Clear codes: Clear emissions-related DTCs after the repair and turn off the check engine light.

Live data stream: Displays continuous data stream information in a live view.

Freeze Frame Stream: Request freeze frame data and check the vehicle's operating status.

I/M Readiness: Check the readiness of the monitoring components and systems.

O2 sensor test: Retrieving and displaying test results from the O2 sensor monitor.

On-board monitoring test: Retrieving and displaying the results of emission-related components and systems of the powertrain.

EVAP system test: Initiates a leak test for the vehicle's evaporator system.

Component testing: Certain vehicle components can be activated by commands sent from the scanner to test their functionality.

As a manufacturer, we offer you:

• Products from our own production with complete quality control
• Latest firmware/software versions according to your product model
• Comprehensive quality inspection of each individual device before delivery
• Option for full product registration for simplified support

We will support you in the long term:

• Regular provision of software updates in accordance with the product specification.
• Documented product history for registered devices
• Extensive technical documentation and application notes
• Expert telephone support for technical questions

Information about our products

• Full product functionality is only guaranteed with proper registration.
• Software updates may be subject to a fee, depending on the product model.
• The voluntary manufacturer's warranty applies in addition to your statutory warranty rights and does not limit them.
• For technical problems, please contact our customer service directly.

Note: LAUNCH Europe GmbH is the authorized manufacturer and distributor of LAUNCH diagnostic tools in Europe. Our products can be identified by their original packaging and serial number.