Official LAUNCH Europe Shop
CRP 919S
CRP 919S
Full system diagnostics with 35 service functions, active tests and remote diagnostics
- 134 vehicle brands: Read all control units - automatic VIN recognition for immediate start
- 35 service functions: oil reset, DPF, EPB, brake bleeding, injectors, TPMS and more
- Bidirectional control: Perform actuator tests and active component testing
- Remote diagnosis via TeamViewer: Expert support for complex diagnoses
- 24 months of updates included: DoIP & CAN-FD for current and future vehicles
In stock
Couldn't load pickup availability
Description
Description
Workshop-level diagnostics - now in your hands
Complete system diagnostics for all control units:
Access all control units installed in the vehicle - read and delete fault codes, capture live data and analyze freeze-frame data for precise fault diagnosis without a workshop visit.
Bidirectional control for active vehicle testing:
Perform active tests and directly control vehicle components. This allows you to check the function of individual components and locate defects quickly and reliably.
Remote diagnostics via TeamViewer:
For complex problems, experts can support your device remotely - ideal for difficult diagnoses, whether in the workshop or on the go.
Supports over 134 vehicle manufacturers
Comprehensive coverage of European, American and Asian brands - from Audi, BMW and Mercedes-Benz to Ford and Opel, and on to Toyota, Honda and Hyundai.
Official LAUNCH Europe warranty
Official LAUNCH Europe warranty
As a manufacturer, we offer you:
- Products from our own production with complete quality control
- Current firmware/software versions matching your product model
- Comprehensive quality inspection of every single device before shipping
- The option of full product registration for simplified support
We support you in the long term:
- Regular provision of software updates in line with the product specification
- Documented product history for registered devices
- Extensive technical documentation and application notes
- Expert telephone support for technical questions
Notes on our products
- Full product functionality is only guaranteed with proper registration
- Software updates may be subject to a charge depending on the product model
- The voluntary manufacturer's warranty applies in addition to your statutory warranty rights and does not restrict them
- In the event of technical problems, please contact our customer service directly
Please note: LAUNCH Europe GmbH is the authorised manufacturer and distribution partner for LAUNCH diagnostic devices in Europe. You can identify our products by the original packaging and serial number.
Shipping & Returns
Shipping & Returns
| Country | Shipping costs | Delivery time |
|---|---|---|
| Germany | 4.99 € · free from 50 € | 1–3 business days |
| Austria | 6.99 € · free from 500 € | 1–4 business days |
| Switzerland | 6.99 €* | 1–5 business days |
| Italy | 12 € · free from 99 € | 2–4 business days |
*Switzerland: shipping up to a goods value of 1,000 €. We currently cannot ship orders with a higher goods value to Switzerland.
Technical specifications
Technical specifications
Technical details
| Product | CRP 919S |
|---|---|
| Diagnostic capabilities | |
| Control units | All systems (workshop level) |
| Service functions | 35 |
| Bidirectional tests | Yes |
| ECU coding | Yes |
| Live data | Yes (text/graphics, recording & playback) |
| Freeze frame | Yes |
| Vehicle coverage | 134 brands |
| Automatic VIN detection | Yes |
| Software update | 2 years of free updates (afterwards, continued use without new models and functions) |
| VAG guided functions | No |
| SGW compatibility | No |
| Report functions | HTML diagnostic report via email or QR code, screenshot |
| Compatible accessories | BST-360, i-TPMS |
| Hardware & Connectivity | |
| Display | 7" touchscreen (1024×600) |
| Processor | 2.0 GHz |
| RAM | 4 GB |
| Storage | 64 GB |
| Operating system | Android 10.0 |
| Battery | Yes, 6000mAh |
| Camera | Yes - rear camera and flash |
| OBD connection | Cable |
| WiFi | Yes (2.4/5 GHz, b/g/n) |
| DoIP protocol | Yes |
| CAN-FD | Yes |
| Bluetooth | No |
| OBD II input voltage: | 9V~18V |
| Cable length | Approx. 1.2 m |
| Ports | OBD II, Type-C |
| Power supply | OBD II, Type-C |
| Dimensions | 242*132*40(mm) |
| Weight | <950g |
| Languages | 11+ |
| English, French, Spanish, German, Italian, Russian, Portuguese, Japanese, Korean, Polish, Chinese | |
| Ports | OBD2, USB-C |
| Package contents | Diagnostic tool, UK/US/EU adapter, Type-C data cable, user manual, quick-start guide, carrying case |
| Certifications | CE |
| Warranty | 2 years |
No. 4012, Launch Industrial Park, North Wuhe Rd,
Bantian Street, Longgang District, Shenzhen, China
Post Code: 518129
en.cnlaunch.com
Heinrich-Hertz-Str.10
50170 Kerpen
Germany
launch-europe.eu
+490227398750
DIAGNOSE
Every control unit. Workshop-level.
The CRP 919S reads and clears fault codes in all installed control units, displays live data in text and graphical form, and automatically generates the diagnostic report.
- All installed control units are scanned.
- Record live data in text and graphical form
- Control components precisely with active tests
- Diagnostic report as HTML by email or QR code
35 SERVICE FUNCTIONS
Do it yourself instead of paying the workshop.
From oil service and DPF and GPF regeneration to high-voltage battery diagnostics—all relevant maintenance tasks in one device.
- Oil service, AdBlue and brake bleeding
- Trigger DPF and GPF regeneration on demand
- TPMS and battery registration
- High-voltage battery diagnostics
COMPATIBILITY
134 vehicle brands. One device.
One of the broadest vehicle coverages in the entire CRP range—from small cars to the current model year.
- Supports 134 vehicle manufacturers
- CAN-FD and DoIP for data rates up to 6× higher
- 2 years of free updates, then usable indefinitely
- 2-year manufacturer’s warranty
Official LAUNCH Europe product
2 years of free updates
German Expert support
30-day money-back guarantee
35 Service Functions
-
Service function for bleeding brake systems equipped with ABS.
-
Basic setting of the EGR valve after replacement or cleaning.
-
Reset of urea values (AdBlue) after replacement or refilling.
-
Adaptation of air/fuel mixture parameters.
-
Reset of SCR catalytic converter adaptation values and reinitialization of the NOx sensor.
-
Basic setting of adaptive front lighting systems after replacement or repair.
-
This service function allows you to enable or disable the transport mode.
-
Software for registering a new starter battery. The control unit must be informed that a new battery with full capacity has been installed. This allows the battery management system to work optimally and charge the battery according to its performance.
-
Deactivation of the automatic engine shut-off or hiding of the Start/Stop warning light.
-
This function is used for testing and diagnostics of the high-voltage battery. In particular for comparing charging history, reading battery status, or commissioning the high-voltage battery.
-
Basic setting of the throttle body after cleaning or replacement.
-
Adjustment of the electric seat positioning with memory function after replacement or repair.
-
Software for brake reset and parking brake basic setting during brake system maintenance.
-
Calibration of air suspension systems after replacing sensors or the control unit.
-
Initialization of window regulator motors and restoration of the automatic function.
-
Reset of transmission adaptation values after an oil change or repair.
-
The A/C system initialization must be performed when the control unit or actuator is replaced, or when the control unit memory has been lost.
-
This service function allows you to store the injector calibration codes in the engine control unit.
-
This function is used for calibration after the adaptive cruise control module has been replaced or repaired.
-
Relearn of the clutch position after replacement.
-
Relearn of the crankshaft position sensor after replacement.
-
Activation of the water pump to bleed the cooling system.
-
Basic setting of the steering angle sensor after replacement or wheel alignment.
-
This function allows you to relearn the angle position sensor/rotor position sensor if its memory is lost or the sensor has been replaced.
-
If the particulate filter is overloaded, fuel consumption increases and engine power decreases. This service function allows you to perform a regeneration of the gasoline particulate filter.
-
The software allows you to read and register tire pressure sensor IDs in the control unit.
-
Basic setting of the zero position of tilt and slide sunroofs.
-
Adjustment of the boost pressure control after replacement or repair.
-
Relearn of immobilizers and transponder keys.
-
Reset of oil service and inspection intervals. Long-life service is also supported.
-
Monitors the crankshaft acceleration during each cylinder's power stroke to determine the relative performance of each individual cylinder.
-
Adjustment of the tire circumference after a change in wheel dimensions.
-
Change of the system language on the vehicle's on-board computer.
-
Personalization settings for hidden comfort features.
-
Query soot mass, reset adaptation values after cleaning, and perform static and dynamic regeneration of the diesel particulate filter.
Europäische Fahrzeugmarken
-
ASTON MARTIN
-
AUDI
-
BENTLEY
-
BMW/MINI/ROLLS-ROYCE
-
BUGATTI
-
CITROEN
-
DACIA
-
FERRARI
-
FIAT/ABARTH/LANCIA/ALFA ROMEO
-
IVECO
-
JAGUAR/LAND ROVER
-
LAMBORGHINI
-
MAN TGE
-
MASERATI
-
MERCEDES-BENZ/MAYBACH/SMART
-
MERCEDES-BENZ CV
-
OPEL/VAUXHALL
-
PEUGEOT
-
PORSCHE
-
RENAULT
-
ROVER
-
SAAB
-
SEAT
-
SKODA
-
VOLKSWAGEN/VW NUTZFAHRZEUGE
-
VOLVO
Asiatische Fahrzeugmarken
-
ACURA
-
DAIHATSU
-
DAEWOO
-
FUSO
-
GENESIS
-
HONDA
-
HYUNDAI/HYUNDAI PLUS
-
INFINITI
-
ISUZU
-
KIA/KIA PLUS
-
MAHINDRA
-
MARUTI
-
MAZDA
-
MITSUBISHI
-
NISSAN
-
SSANGYONG
-
SUBARU
-
SUZUKI
-
TOYOTA/LEXUS
Amerikanische Fahrzeugmarken
-
CHRYSLER/JEEP/DODGE
-
FORD/LINCOLN
-
FORD (EUROPE)
-
GM/BUICK/CADILLAC/CHEVROLET
-
GM (BRAZIL)
-
HOLDEN (AUSTRALIA)
Chinesische Fahrzeugmarken
-
BAIC
-
BORGWARD
-
BRILLIANCE
-
CHANGAN
-
CHANGHE/CHANGHE SUZUKI
-
CHERY
-
FOTON
-
GONOW
-
GWM
-
HAFEI
-
HAIMA
-
JAC/JAC REFINE
-
JINLONG
-
JMC
-
JOYLONG
-
LUXGEN
-
MAXUS
-
MG/ROEWE (SAIC)
-
SGM
-
ZOTYE
-
ZX AUTO
Russische Fahrzeugmarken
-
GAZ
-
VAZ
More than just reading codes: take action.
What the CRP 919S can actually change in the control unit.
Bidirectional active tests
Activate components precisely instead of guessing: switch fans, pumps, valves, and injectors directly from the device. This helps you distinguish a faulty component from a faulty circuit.
ECU coding
Code and adapt control units individually.
35 Service Functions
Features you would otherwise pay for at a workshop—guided step by step on the display.
Export diagnostic report
Diagnostic report in HTML format via email or QR code, screenshot
What you really need it for in everyday life
Six situations in which you would otherwise have needed a workshop appointment.
The check engine light is on
Read and understand the error code to find out whether you can keep driving—without having to take your vehicle to a workshop.
Before buying a used car
Scan all control units in just a few minutes. See what was erased recently and whether the airbag, ABS, or transmission has stored fault codes.
Before the emissions test
Check I/M readiness: See in advance whether all readiness monitors are set, so you don’t fail because of a minor issue.
After the oil change
Reset the service interval yourself instead of making an appointment. It takes less than a minute on the device.
Replace the rear brakes
Open and close the electronic parking brake. Without this command, you cannot access the rear brake pads on modern vehicles.
New battery installed
Register the battery in the control unit. If this step is skipped, the alternator will charge according to the old profile, causing the new battery to age prematurely.
Full-system diagnostics with bidirectional control
You get that
Complete kit in carrying case
- ✓ Diagnostic device
- ✓ UK/US/EU Adapter
- ✓ Type-C data cable
- ✓ User manual
- ✓ Quick Start Guide
- ✓ Case
Expandable with additional modules: Compatible with the BST-360 battery tester and the i-TPMS tyre pressure monitoring system (sold separately). Note: Not compatible with vehicles equipped with a Security Gateway (SGW).
The all-round diagnostic tool for ambitious users
35 Service Functions
From oil service resets and DPF/GPF regeneration to brake bleeding, TPMS, AdBlue resets, and high-voltage battery diagnostics—every essential maintenance task in one device.
DoIP & CAN-FD protocols
Modern protocols enable data rates up to 6 times higher than classic CAN, saving time during complex diagnostics and flashing applications.
Remote diagnosis via TeamViewer
For complex diagnostics, experts control your device via TeamViewer from any PC, no matter where you are.
Intelligent diagnostics
Automatic VIN recognition with an integrated DTC library for quickly identifying problems without technical expertise.
Powerful hardware & software
The CRP 919S offers a professional diagnostic platform with a 7-inch touchscreen and Android 10.0:
ORIGINAL LAUNCH TECHNOLOGIE
As the official manufacturer, we offer you workshop-quality diagnostic equipment directly. Since 2003, we have been developing fully featured solutions delivered straight from the developer to you—with a full warranty and German-language support.
